Adjustable offset triple clamp (upper)

We developed these triple clamps to correct a severe handling issue induced by the installation of GSX-R1100 forks on an FXR with the standard GSX-R triple clamps. The GSX-R clamps have far too little offset, which creates excessive trail. These triple clamps reduce the trail to below the stock FXR's, have ±6mm of adjustment, and produce handling uncharacteristically good for a Harley-Davidson. Each set of bushings has a set of steering stops that goes with it, which, if the bushings are reversed, is also reversed (see lower clamp).

solid model

wireframe

blueprint

lower triple clamp

solid model of both upper & lower triple clamps

stock FXR chassis geometry

FXR chassis geometry with GSX-R forks & triple clamps

FXR chassis geometry with GSX-R forks & motolab triple clamps

FXR tank with frenched-in GSX-R filler cap

dyno chart

photo by CT3